Blackmagic Camera ATEM Control
Generic informations can be found in the global Blackmagic guide
Wiring
![](/img/Integrations/Blackmagic/blackmagic-atem-setup.png)
Setup
You first need to add your ATEM in your configuration, see this guide.
You should have this block configured and green:
![](/img/Integrations/Blackmagic/ATEM-block.png)
Then you can add your cameras:
- Click on the
+
in the camera block, a new panel will appear on the right - In
General
Configure a Numer and a Name - Select
Blackmagic
for the brand andAtem
as the model. - Then select in the interface drop-down list your ATEM and camera ID
If your ATEM has the IP 10.192.1.3
and your camera the ID 1
:
- The camera setup:
![](/img/Integrations/Blackmagic/BM-camera-settings.png)
- The camera block:
![](/img/Integrations/Blackmagic/BM-camera-block.png)