CI0 Tally LED Assembly

This guide provides an example of solderless tally assembly for RIO / CI0 devices.

Required parts

• Wired 12V Red Led
• Toolless Tyumen Wire Plug
• CY-CBL-6P-PWR

Assembly

• Cut the LED wires at the required length, make sure to remove the extra copper.

• Cut the CY-CBL-6P-PWR to remove the extra copper.

• Pay attention to the polarity. The plugs have a "+" symbol for the red wire side identification.

• Push the wires all the way into the plugs.

• Close the plugs and press them firmly.