Dreamchip ATOM one SSM500

Overview#

Dreamchip ATOM one SSM500 high-speed camera can be operated in standalone or in EVS modes from the Cyanview RCP.

  • In standalone mode, replay and trigger is done via Stream Deck or shuttle connected to the RCP. Replays are then stored in the camera's internal storage.
  • In EVS mode, The RCP acts as a bridge between EVS system and the camera.

Standalone Mode#

cyanview-support-SSM500-Dreamchip-CI0-RCP-Standalone

This mode allows to operate slow motion and replays directly from the Cyanview RCP via a Streamdeck and a Shuttle Pro.

  • Connect the SSM500 to the CI0 using a Cyanview cy-cbl-dreamchip-02 cable.

  • Add your SSM500 camera to the RCP like described in the Serial Camera guide.

  • Connect the Streamdeck and Shuttle Pro to the USB connector of the RCP.

    cyanview-support-RCP-USB-back-port
  • Associate the Streamdeck and Shuttle Pro to the SSM500 controller.

Operation#

EVS Mode#

cyanview-support-SSM500-Dreamchip-CI0-EVS

In this mode, the RCP act as a gateway for the EVS.

Please refer to the EVS hypermotion page for EVS configuration.

Operation#