Canon XC
This allows to control your camera over ethernet as long as your camera is compatible with XC protocol.
Wiring

Camera control
Exposure | |
Auto Iris ON/OFF | |
Iris | |
Master gain | |
Shutter | |
ND filter | |
Paint | |
White Balance ( Red gain & Blue Gain) | |
Color temperature balance | |
Auto White balance | |
ATW (Auto Tracing White) ON/OFF | |
Detail | |
Master Black and Black Gamma | |
Knee | |
Others | |
Auto Focus ON/OFF | |
Camera Menu Control | |
Lens (zoom, focus in speed) |
Camera Configuration
You need to:
- Configure ethernet static IP
- Enable XC protocol
You can follow the wizard in the menu ´Network Settings > New Conn. Settings (Wizard)`:

- For
Select Function
step, choseXC Protocol

For
Communication Settings
, choseCreate New Comm. Setting
For
Network Type
, choseEthernet
For
Setting Method
, choseSetup with Network Connection
For
IP Address Settings (IPV4)
, choseManual Setting
Then enter a valid IP

- For
XC Protocol
, choseCreate New Func. Setting

- For
Authentication Method
, choseNo Auth.

If your camera IP is not in the range 10.192.0.0/16
, you can follow this guide
For the control:
- In the menu
Custom Picture
, SeletectUserXX
- Edit and ensure to setup
Color Space
toBT.709 Standard
to access advanced shading (detail, etc.)

RCP/RIO configuration
Setup a new camera via the RCP Configuration UI:
- Enter a custom number, name, etc.
- Select Canon brand
- Select XC for the protocol
- Enter the IP of your camera
This should looks like this:

And once correctly connected, it should be green:
