Skip to main content

Blackmagic Smart Videohub

Overview​

cyanview-support-RCP-Blackmagic-Videohub

RCP support all Blackmagic Smart Videohub models.

What is that configuration about?​

  • Smart Videohub inputs will be associated to the camera configured in the Cyanview RCP.
  • A vision output can be configured. The active camera on the RCP will then be te one displayed on the vision.
  • A bidirectional input/camera selection between Smart Videohub and RCP is established.
  • The name of the associated camera will be displayed on the Smart Videohub inputs.

Configuration​

1 Connect your SDI inputs and outputs to the Videohub ports.

2 Configure your cameras in the RCP (see Add IP Camera or Add Serial Camera).

3 Configure the Blackmagic Videohub in the Configuration page of the RCP Configuration Web UI.

input / output port configurations syntax:

  • 2: only 2 (single value)
  • 1,3: 1 and 3 (list)
  • 1-3: 1, 2 and 3 (range)

The settings can also be mixed, for example :

  • 1,4-6: input/output 1, 4, 5, 6

4 Blackmagic and Cyanview RCP are now following each other.