BirdDog PTZ
Compatibility
Support for IP cameras:
- Birddog P100
- Birddog P200
- Birddog P400
- Birddog P4K
Controls
| Control | P100 | P200 | P400 | P4K |
|---|---|---|---|---|
| OSD | ✔ | ✔ | ✔ | ✔ |
| Shutter + auto | ✔ | ✔ | ✔ | ✔ |
| Iris + auto | ✔ | ✔ | ✔ | ✔ |
| Focus + auto | ✔ | ✔ | ✔ | ✔ |
| Zoom | ✔ | ✔ | ✔ | ✔ |
| Pan/Tilt/Presets | ✔ | ✔ | ✔ | ✔ |
| ATW / AWB | ✔ | ✔ | ✔ | ✔ |
| Gains (M / R / B) | ✔ | ✔ | ✔ | ✔ |
| Master gamma | ✔ | ✔ | ✔ | ✔ |
| Saturation | ✔ | ✔ | ✔ | ✔ |
| Detail | ✔ | ✔ | ✔ | ✔ |
| Master black | ✔ | ✔ | ✔ | |
| D-Zoom | ✔ | |||
| Multimatrix | ✔ | |||
| Denoise | ✔ | ✔ | ✔ | |
| Matrix | ✔ | ✔ | ||
| Auto brightness | ✔ | ✔ |
Compatible Cyanview device
- RCP for local (LAN) and remote control (internet)
- RIO for remote control (internet)
Setup
The link between the RCP/RIO and the camera is IP.
On camera side, setup a static IP
On RCP side:
- Ensure to be be on your camera network with a compatible IP
- Setup a new camera via the RCP Configuration UI:
- Select Birddog brand
- Select P100 or P200 or P400 or P4K based on your PTZ model
- Enter the IP of your camera
And once the camera is correctly controlled by the RCP, it should look like that:
