Anxinshi joystick allows control of any PTZ supported by Cyanview RCP.
The RCP allows to control all PTZ configured with a single joystick.
Anxinshi joystick is to be found here.
1 If not done yet, Configure your PTZ in the RCP.
2 Connect PTZ USB Joystick to the RCP.
4 PTZ USB Joystick now controls your PTZ cameras via the Cyanview RCP.
Long push on a button will save the PTZ position.
Short push will move the PTZ to the previously saved position.
Positions can be Saved/Loaded from either the Anxinshi joystick, the RCP LENS menu, and the Elagato Stream Deck.