The different Cyanview devices share a common Configuration Web UI.
To open the UI, see access your device.
The configuration UI sections:
- Configuration add and configure camera, devices, controls,...
- GPIO operate Tally, video router.
- Switcher virtual video switcher.
- Admin device updates and statuses.
- Snapshot configuration backup.
To add and configure the different supported devices, click the "+" button in the corresponding section. Then complete configuration in the self explanatory Settings form on the right on the page.
Use Global to set default resolution and frequency. This format will be proposed when configuring devices. IP parameters allows to set additional IP Connection if network setup requires it.
Camera add and configure camera.
Controllers Cyanview solution allows to use multiple controllers for the different operators. Number of controllers is limited by licence.
Components Configure and manage manage video processor, Router, Switchers, ...
Features Setup different Bus for specific applications.
Cyanview solution offers lots of IO possibilities over the different devices.
The GPIO provides an overview and allows to set the values of the different IO available on the connected devices.
Select the active camera on the corresponding monitor.
The Admin allows to manage the releases and verify the connections status of the RCP.
The Releases section lists available application releases you can run on your device see device update manual.
The Remote support is OK when the RCP is reachable by Cyanview Support server. Support server is used to deal with specific advanced setup.
Connectivity check provide IP connectivity statuses: Network, Internet, Support,...
RCP Logs can be downloaded for extended consultation.
File page allows to take and restore backups (snapshots).
Note: Automatic backup are taken when updating, see Product Update