Skip to main content

Tally light

· 2 min read

This article introduces a new product, our tally light:

Introduction

Our RCP can route your tally from various inputs to your camera. If your camera has tally (Panasonic PTZ, Sony ENG, etc.), we will trigger it alongside the shading control.

If your camera doesn't have one (mini camera, camcorder, etc.), the CI0/RIO has embedded LEDs, that are configured for tally by default. One for each port.

But this is sometimes not enough and you need a more visible tally light.

Solutions and use case

If you need a tally in the viewfinder or want to design/integrate your own tally box, we have a DIY kit and an assembly guide.

If you need a plug and play solution to integrate with your camcorder or DSLR, we designed this box:

Features:

Features:

  • 12V DC
  • Front and rear separate on/off buttons
  • Front and rear separate dimming
  • Shoe lock mounting (camcorder, DSLR, etc.)
  • Screw mounting

Wiring:

You can simply plug it in your CI0 or RIO unused port:

And then secure it, either:

On a magic arm, or similar, using as screw:

Or in the shoe lock: